Touching electrostatic eliminator also named human body electrostatic eliminator.
With the rapid development of industrial economy,
more and more appear particularly important to eliminate static electricity.
The human body electrostatic eliminator which adopts a passive circuit,
the circuit works by electrostatic human body, finally to eliminate the electrostatic effect.
Its features are: small size, light weight. Without power supply. Convenient installation.
The characteristics of static elimination without feeling.
Touching type electrostatic eliminator,
the appearance is made of stainless steel tube and the ball is made of stainless steel,
which is suitable for chemical industry, metallurgy, military, oil, fireworks, computer room,
high-grade hotels,hotel, office and other inflammable and explosive places.
The circuit principle and the other is basically the same,
it is the biggest characteristic of energy at the temperature of -50~100 ℃ normal work.
Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator Technical indicators
1). The human body electrostatic voltage: V ≤ 20KV
2). Static release time: t ≤ 100mS
3). The maximum release current: I ≤ 0.1mA
4) the environment temperature: 20 ℃.
5). Environmental humidity: ≤ 80% (40 ℃)
Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator Test conditions and results
| The human body electrostatic voltage: 18KV environment temperature: 20 ℃ |
| The five fingers release time | + | 0.091s | residual voltage -10V |
| The five fingers release time | - | 0.090s | residual voltage -10V |
| Palm release time | + | 0.084s | residual voltage -9V |
| Palm release time | - | 0.082s | residual voltage -9V |
Electrostatic elimination time conforms to the ESD standard
The use and installation methods:
just a finger touch the metal ball 0.1s can eliminate the static electricity of the human body.
The base type electrostatic elimination ball: first through a screw nut screw at the bottom
of the tube on the stainless steel wire, grounding wire with the best of not less than
0.3 square multi strand wires to the ground.
No base type electrostatic eliminating ball: the ball electrostatic eliminator ahead
buried underground needs at least 400mm, a header body upward, thus completed the installation.
Maintenance:
Do not enter the debris inside the steel tube, especially metal objects,
because there are the original circuit, if the metal circuit does not work.
|
|
Human Body Electrostatic Eliminator/Touching Electrostatic Eliminator Images
|
